Modeling of Energy Density Distribution in Rock Mass on the Basis of Seismotectonic and Geodetic Data

Using the focal mechanisms of earthquakes taken place from 1950 to 1996, the type and direction of principal strains were established, which made it possible to determine the volume stress-strain state of the south-east flank of the Baikal rift zone on the basis of the inverse problem solution. The variations in the stress-strain fields and spatial distribution of the stored potential energy density were found by the displacements of the daylight surface points in Tunkinsk geodetic proving ground in 1975 - 1986.     

武钢热轧厂层流冷却系统改造及节能效果

针对武钢热轧厂层流冷却系统能耗高，水压不稳，系统反应慢，供水泵工作效率低等缺陷，进行系统改造。提高了系统的控制精度和产品质量，节能降耗取得了明显的效果。     

一种新的直扩超宽带系统快速同步方案

本文提出了一种新的基于能量窗的直扩超宽带系统码片同步方法，通过设计具有重复特性的码来提高能量窗的信噪比，从向可以较为准确地获得码片同步，并将窗口中的信息作为接收端本地信号与接收信号进行匹配接收，这样可以存未知接收信号相位的情况下有效地接收多径能量，提高接收信噪比。在完成码片同步之后再进一步进行PN码的相位同步，这里以线性搜索为例分析得到超宽带信号总的平均同步时间，并与现有的超宽带同步方案进行了比较，新方案将信号捕获分成两部分完成，大大降低了超宽带信号捕获时间。     

合成氨扩能改造中锅炉存在的问题及采取的措施

针对天脊集团年产30万t合成氨扩能改造,给2台225t/h高压锅炉带来的除氧器热量过剩、锅炉给水温度升高、主蒸汽温度降低等一系列问题,分析了产生问题的原因,从节约能源、提高锅炉效率考虑,提出了相应的解决问题的办法:利用热量分流、改造省煤器管、增加二级过热器受热面积。经过3年多的生产实践证明,取得了良好的效果。     

柴达木盆地断裂系统特征与油气勘探战略方向

基底断裂格局决定了盆地构造演化和沉积发育,导致了北缘、中部和昆北3个各具特色的断裂构造系统。北缘断裂构造系统平面上以反S展布、剖面上以一系列北倾南冲的逆冲断层带及其所控制的同沉积构造呈阶梯向南下掉为特点,受北部祁连山构造应力系统的作用;南部昆北断裂构造系统发育压陷断槽和断阶带,受南部昆仑山构造应力系统的作用;中部断裂构造系统以两断夹一隆的冲起构造为特色,同时受祁连山和昆仑山构造应力的共同作用。断裂对油气藏的形成和分布有重要的控制作用,表现在对烃源岩、储集条件、圈闭形成及油气运聚等方面。依据断裂控烃特征并针对柴达木盆地的具体情况,柴达木盆地油气勘探应迅速转移到盆地腹地即中部断裂构造系统区,尤其是鄂博梁Ⅱ号一伊克雅乌汝、鸭湖—台吉乃尔构造带和中南隆起区,有望取得重大突破。      

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

沙漠生物结皮土壤发育特征的研究

通过对沙漠生物结皮层相关的土壤特性研究表明,结皮层不仅具有明显的养分富集和细粒物质的聚集作用,而且结皮层腐殖质成份的含量以及其分子结构和复杂程度也在增加。腐殖质光学特性的变化趋势明显反映了不同地区结皮层土壤发育的地带性特征。结皮层持水量明显高于沙层,并对降水再分配有一定影响。     

Electrical conductivity of ferroelectric sodium vanadate,rubidium vanadate,cesium vanadate and their solid solutions

The d.c. electrical conductivity of sodium vanadate, rubidium vanadate, cesium vanadate and their solid solutions sodium-rubidium vanadate and sodium-cesium vanadate were studied by a two-probe method in the temperature range covering their transition points. The electrical conductivity shows sharp change at the phase transition temperature of these materials. In NaVO₃, RbVO₃ and CsVO₃, increase in d.c. conductivity is observed in the ferroelectric region while nonlinearities are observed above transition temperatures. In solid solutions, the activation energy in the paraelectric state is higher than that in the ferroelectric state and depends upon sodium concentration.     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

线性浮阀在大型冷水机组中的应用

介绍新型节流装置——线性浮阀的结构、工作原理、特点及其在大型冷水机组中的应用以及实际使用中可能存在的问题，为在设计具有较高能效比的中大型冷水机组中，在节流机构选择应用上提供更大的选择空间。